TOP > ENGLISH HOME > Our catalog > NP Series

NP Series

NP81
NP81
 

The Nakashimada NP series 2 Die 3 Blow Parts Formers are developed for high precision components. Since its first introduction in 1989, more than1000 units have been already delivered to major parts manufacturers in the automobile, electronics, communications and aircraft industries worldwide. The unique 2 Die 3 Blow configuration with fingerless punch transfer on NP series, combined with kick out in both Punches and Dies, enable the manufacture of complex, short, difficult-to-transfer parts free from the critical timing or alignment issues normally associated with any finger transfer machines. Their vertical punch shift mechanism has hugely increased the accuracy of centering while reduced stress on large-diameter head and eccentric load parts.  Overall tool life is thus lengthened.

Available from 2.5mm to 18.0mm in wire diameter and up to 135mm in shank length, the NP series present a flexible choice for the manufacture of a wide variety of complex precision-formed components.  As this configuration also allows to be used as 2 Die 4 Blow, NP machines are extremely useful for tubular and trimmed parts as well. In addition to the above, finger transfer, catch chute, pulse dial (standard on NP81), Segment DKO, etc are available as options.

 

Very complex precision-formed components applications on the NP series have been increasing with the effort of our tool development team.  We regret to say that we can not show you all of our applications because there are some parts under Non-Disclosure agreements.

 

- For detailed information, please contact our sales persons.

NP81 Forging area
NP81 Forging area
 
2D3B Samples

2D3B Samples

 
 
 

Specifications:

NP Series    WEB CATALOG

- Specifications are subject to change without notice.